Have your iPhone’s Magsafe charger stopped working? Many users are facing this issue where their charger is charging for the first five to ten minutes and then stops working. Before we get into the tutorial part of the solution, let’s first understand more about the Magsafe charger. Magsafe was first launched by Apple in 2006 for charging the MacBook Pro. The latest Magsafe charger is an alternative to wireless charging for iPhones, primarily iPhone 12 and upwards.
When this model came into the market, Apple fans hurried to get theirs even at a much higher price than other wireless chargers. Well, it’s Apple, so people expected the premium price. The Magsafe came with many advantages like super fast charging, no scratches near the charging port, and a premium build. Another advantage of using this charger is the strong magnetic attachment that keeps your phone from sliding here and there.
With time, it quickly became everyone’s favorite. The pros of the Magsafe outdid the cons and more people started buying it. However, recently many users are experiencing trouble with the MagSafe as it stops charging suddenly. If you are one of those users, then read further to know what you can do to fix it.
Method 1: Hard reset on iPhone for MagSafe charger
There could be multiple reasons for your MagSafe charger to not work. Just because your phone stops charging does not necessarily mean that there is something wrong with the charger itself. It could also be your iPhone that is acting up. To make this clear, remove your MagSafe charger from your phone and try charging your AirPods or iPhone review unit. If the charger is charging your other devices, then you have got your answer. So what should you do if there’s something wrong with your iPhone?
According to long-time Apple users, the solution lies in a hard reset. To do that, follow the steps below:
Step 1: On your iPhone’s side, press the volume up button and then release it.
Step 2: Further, you have to press and release the volume down button.
Step 3: And finally, long press the side button, until you see the Apple logo.
Step 4: After your iPhone boots up, charge it again. By now it will show the MagSafe animation as well as the charging icon from the top-right corner.
However, if that does not work, it is ideal to reach out to Apple support.
Method 2: Plug MagSafe into Power Source
As you know that MagSafe charges are not completely wireless also, and users need to connect them to a power source to charge. To avoid any issues, disconnect your iPhone from the charger. After that you can plug-in your MagSafe charger’s USB-C cable into an adapter. Moreover, plug the adapter into an outlet. Then you can place your iPhone at the center of the MagSafe charger for charging. If you do it correctly, it will snap back into place.
Method 3: Remove iPhone’s Case
Contrary to popular belief, phone cases can have more cons than its pros. For instance, in this case, your iPhone’s case is so thick that it prevents your phone from getting wirelessly charged. Wireless chargers get attached with the help of magnets whose strength may loosen when there is a thick barrier. Furthermore, if your case is one of those kinds that store your money, credit cards and IDs etc, then you surely need to remove your case while charging. You can even consider buying a special case that is designed for your MagSafe.
Method 4: Restart iPhone to fix MagSafe Charger
Oftentimes, a small bug in the software can cause troubles like this. This is where the age old technique of restarting your iPhone comes handy. A simple solution of this stature can actually solve these bugs with no assistance whatsoever. To restart your iPhone, do the following:
Step 1: Press and hold the side button along with the volume up/down button to shut down your phone.
Step 2: Wait for a few seconds till a slider comes that says slide to power off. Then you can slide the Red color icon from your left side to the right.
Step 3: Aftre this your device will shut down.
Step 4: To restart the device, press and hold the side button to turn it back on. As you do this, the Apple logo will appear on the screen.
Step 5: Now you can let go off the side button and it will turn your device on.
Ans- As you know that MagSafe charges are not completely wireless also, and users need to connect them to a power source to charge. To avoid any issues, disconnect your iPhone from the charger. After that you can plug-in your MagSafe charger’s USB-C cable into an adapter. Moreover, plug the adapter into an outlet. Then you can place your iPhone at the center of the MagSafe charger for charging. If you do it correctly, it will snap back into place.
In addition to these methods, if they don’t work, you can also update your iPhone as an outdated iOS will not support wireless charging. Furthermore, you can also check if your MagSafe charger is clean as junk and debris tend to stay on it and can create resistance. Use a damp cloth and wipe the surface. You can also use an anti-static brush to for deep cleaning. So these were some of the techniques. Let us know if any of them worked for you or even if they didn’t.